Folding and Stretching Kit

$239.77

Almost a $20 dollar savings when you purchase this complete kit for folding, stretching, and general forming tools.

What you’ll receive in this set:
– Steel starter cone. (Used to start the fold to protect the folding cones and mandrel)
– Folding cones. (Used with ring stretchers/reducers)
– Universal Folding Mandrel. (Used with an arbor press or hydraulic press. I like to use mine with a 1 ton arbor press with the steel starter cone first)
– Steel Universal Folding Mandrel. (For that really tough brass and larger thick coins. Wrap it in pipe tape to protect your inside detail)
– 1/4″ folding and stretching mandrel. (Use this tool with an arbor or hydraulic press to both fold and stretch a 1/4″ hole in your coin to allow it to fit over your ring stretcher)
– MEGA stretcher. A very useful tool. (This will allow you stretch a ring out to a size 23-25. Get one more to double up and make a Morgan sized ring to 1.7″ outside diameter. You can make a cuff bracelet with that size!)
– Coin ring anvil. (A great tool to help straighten out a wobbly ring. I use it as a spacer and top pressing plate as well. Lots of great uses with this tool)
– Wood holder to organize your Jason’s Works folding, stretching and forming tools.

Description

Almost a $20 dollar savings when you purchase this complete kit for folding, stretching, and general forming tools.

What you’ll receive in this set:
– Steel starter cone. (Used to start the fold to protect the folding cones and mandrel)
– Folding cones. (Used with ring stretchers/reducers)
– Universal Folding Mandrel. (Used with an arbor press or hydraulic press. I like to use mine with a 1 ton arbor press with the steel starter cone first)
– Steel Universal Folding Mandrel. (For that really tough brass and larger thick coins. Wrap it in pipe tape to protect your inside detail)
– 1/4″ folding and stretching mandrel. (Use this tool with an arbor or hydraulic press to both fold and stretch a 1/4″ hole in your coin to allow it to fit over your ring stretcher)
– MEGA stretcher. A very useful tool. (This will allow you stretch a ring out to a size 23-25. Get one more to double up and make a Morgan sized ring to 1.7″ outside diameter. You can make a cuff bracelet with that size!)
– Coin ring anvil. (A great tool to help straighten out a wobbly ring. I use it as a spacer and top pressing plate as well. Lots of great uses with this tool)
– Wood holder to organize your Jason’s Works folding, stretching and forming tools.

*GUARANTEED YOU’LL LIKE THESE TOOLS OR YOUR MONEY BACK!*

*BE SURE TO SOFTEN THE EDGES OF THE HOLE TO REDUCE WEAR ON THE CONES*

*CHECK OUT THE VIDEO ON THESE TOOLS HERE (copy and paste into your url address bar:: https://www.youtube.com/watch?v=Z0HFSwKqfeU

A pro tip video on cones and mandrels:

MEGA stretcher video:

Be sure to follow me on Youtube, Etsy, and Instagram for new tools coming out.

NOTE: A detailed description of the coin ring making process can be found in “How to Make Coin Rings” training manual found here:
https://jasons.works/product/coin-ring-tools-training-manual/

*NOTE: NICKELS AND OTHER HARD ALLOYED COINS (BRASS IS O.K.) SHOULD BE STARTED WITH A STEEL MANDREL AND THEN FINISH THE FOLDING PROCESS WITH THE STABILIZER MANDREL.

*NOTE: TO PROLONG THE LIFE OF THE CONE, BE SURE TO BEVEL AND SOFTEN THE EDGES OF THE HOLE IN THE COIN JUST AS YOU WOULD FOR THE DELRIN BALLS.

*Coins not included*
*CAUTION! These are small components and can cause a choking hazard to children. Keep away from children*

Title

Go to Top