• The biggest savings when you purchase this kit! This kit is designed for the person who wants every Jason's Works tool, the best of the best! Even before I started offering tools (I was directing people in my manual to my machinist to make them tools at the time), my machinist told me he kept getting requests for "the whole gamut" of tools. Well, that is finally available! This kit includes: - 9 piece Auto punch kit (does not require spacers) - 11 piece reduction die kit - Folding and stretching kit - Master Swede kit - Coin ring manual (A PDF file will be emailed to you upon processing your order. Commonly known as "The coin ring Bible". You can print this off if you would like a hard copy. New and free PDF editions will be sent to you upon request.) - Three rolls of pipe tape - Three Jason's Works Stickers - Jason's Works business card Always wear safety glasses when using this punch/die set and a brass hammer. Please view this video for proper use of the punch: https://www.youtube.com/watch?v=GIkQy1H6MiI&t=149s *COINS AND RINGS NOT INCLUDED*
  • Also includes a FREE PDF Training Manual & Excel Engine Calculator. What you will receive: - Top and bottom Auto Punch housing. - Nine punches and dies. 1/4', 5/16", 3/8", 7/16", 9/16", 1/2", 5/8", 11/16" and 3/4" - Wood tool holder for the housing and all nine punches - One protective plastic washer to protect the top housing during transport. Watch an in-depth video of the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI   (Note: The Auto punches will not work in the classic self centering punch)
  • Save when you purchase a kit! This starter kit is for the person who is interested in learning the coin ring craft and wants a jump start on tools and techniques. (NOTE: The punch in this kit does not require spacers to center coins) This kit is designed to make rings for the most common sized coin rings for men and women. Please view this video for proper use of the punch: https://www.youtube.com/watch?v=GIkQy1H6MiI
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! This is the full kit and comes with three hardened stainless steel Swedish wrap dies, 9 hardened bronze plungers, ring bearer, three Ross Push Followers, two rolls of pipe tape, two stickers, and a FREE tool holder. These dies are designed to be the most efficient Swedish wrap dies available. For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *COINS AND RINGS NOT INCLUDED*
  • This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/
  • Almost a $20 dollar savings when you purchase this complete kit for folding, stretching, and general forming tools. What you'll receive in this set: - Steel starter cone. (Used to start the fold to protect the folding cones and mandrel) - Folding cones. (Used with ring stretchers/reducers) - Universal Folding Mandrel. (Used with an arbor press or hydraulic press. I like to use mine with a 1 ton arbor press with the steel starter cone first) - Steel Universal Folding Mandrel. (For that really tough brass and larger thick coins. Wrap it in pipe tape to protect your inside detail) - 1/4" folding and stretching mandrel. (Use this tool with an arbor or hydraulic press to both fold and stretch a 1/4" hole in your coin to allow it to fit over your ring stretcher) - MEGA stretcher. A very useful tool. (This will allow you stretch a ring out to a size 23-25. Get one more to double up and make a Morgan sized ring to 1.7" outside diameter. You can make a cuff bracelet with that size!) - Coin ring anvil. (A great tool to help straighten out a wobbly ring. I use it as a spacer and top pressing plate as well. Lots of great uses with this tool) - Wood holder to organize your Jason's Works folding, stretching and forming tools.
  • The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! This is the full kit and comes with two 2" hardened stainless steel Swedish wrap dies, 5 hardened bronze plungers, and a FREE tool holder, 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. Get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *COINS AND RINGS NOT INCLUDED*
  •   What you will receive: - .7 x.8 @17 degree reduction die - .9 x 1.0 @ 17 degree reduction die - steel folding mandrel - Coin ring anvil Watch an in-depth video of the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI   (Note: Coins and pipe tape not included)
  • Now punch up to a 1/4"" hole in your pennies, dimes, and other small coins! This is a custom made 1/4 inch punch, die, penny spacer, dime spacer, and a top plate with a 3/8"" hole to press and hold down the coin. The punch and die are machined from tool steel and hardened to approximately 52 rockwell. Proudly made in the U.S.A.
Go to Top