-
Store your Swedish Wrap tools in a custom made holder. Made from high quality red oak, this tool holder will hold your two Swedish dies and 5 bronze plungers. *Tools not included* -
Use this mandrel to expand the 1/4" hole in pennies, dimes, or any other coin that you punch a 1/4" hole in. This tool folds the coin and expands the hole so that the coin will fit onto the expanding mandrel of the coin ring stretcher/reducer. -
Get this die to upgrade your current 5/8 inch punch set for your Jason's Works self centering coin ring punch. I like to use this punch size for Morgan dollar and Silver Eagle dollar sized coins. The die is hardened tool steel, hand lapped to be ultra smooth, and zinc plated to resist rust. This new design allows for the plug to fall through the die immediately. Remove the plug from the housing by simply turning the housing over. -
This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/ -
Out of stock
By popular demand, now you can store your folding/reduction dies and coin ring anvil to organize your work space. Made from high quality red oak, this tool holder will hold up to 8 reduction dies for easy access while making your coin rings. * A recent review: "Excellent tray holds all my folding dies! Finished with what appears to be a light varnish to protect the surface while retaining the wood's natural color. The inside of each recess is bare. I might add a little clear coat or varnish in them, but I'm undecided on that as of now. If they were varnished I think the dies may clank around in each hole so maybe bare wood is the better option. I also got the Coin Ring Tool Holder which has the same finish as this. Excellent quality wood with no imperfections or cracks!" Angus MacGyver on Apr 25, 2016 5 out of 5 stars *Tools not included* -
By popular demand, now you can store your Jason's Works folding and stretching tools to organize your workspace. Made from high-quality red oak, this tool holder will hold up to 11 reduction dies for easy access while making your coin rings, including the 1.7 x 1.8 @17 degree BIG boy die. *Tools not included* -
Almost a $20 dollar savings when you purchase this complete kit for folding, stretching, and general forming tools. What you'll receive in this set: - Steel starter cone. (Used to start the fold to protect the folding cones and mandrel) - Folding cones. (Used with ring stretchers/reducers) - Universal Folding Mandrel. (Used with an arbor press or hydraulic press. I like to use mine with a 1 ton arbor press with the steel starter cone first) - Steel Universal Folding Mandrel. (For that really tough brass and larger thick coins. Wrap it in pipe tape to protect your inside detail) - 1/4" folding and stretching mandrel. (Use this tool with an arbor or hydraulic press to both fold and stretch a 1/4" hole in your coin to allow it to fit over your ring stretcher) - MEGA stretcher. A very useful tool. (This will allow you stretch a ring out to a size 23-25. Get one more to double up and make a Morgan sized ring to 1.7" outside diameter. You can make a cuff bracelet with that size!) - Coin ring anvil. (A great tool to help straighten out a wobbly ring. I use it as a spacer and top pressing plate as well. Lots of great uses with this tool) - Wood holder to organize your Jason's Works folding, stretching and forming tools. -
This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 OR 25 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* View a youtube video using a reduction die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/ -
DIGITAL EXCEL FILE - NOT A HARD COPY You will be sent an email with a link to download the file after checkout. This file is also available in the "DOWNLOADS" folder within your Jason's Works account. Use this Excel engine calculator to figure out the needed 90% coin silver and pure 99.9% silver to alloy your own sterling silver for pouring bars and/or making your own sterling silver jewelry. Just input the desired total weight of sterling in grams and the program will tell you how much coin silver and pure silver to add. This Excel program was designed and made by my dear friend Michael P. By using this engine, you can calculate the needed coin silver and pure silver for a specific total weight of 92.5% sterling silver. 92.5% of silver is the minimum required for sterling silver. Previously, I was using equal parts of coin silver and 99.9% silver to obtain 95% sterling silver or two parts 90.0% coin silver with one part 99.9% fine silver for 93.3% sterling silver. Michael noticed that there was a noticeable waste of silver in this method. By using this program, you are able to obtain exactly 92.5% sterling silver. In addition to the engine calculator are the mathematical equations and excel programming so that you can check the work yourself if you desire. Also, there is a table showing possible ring size, hole size, and ring band width ratios. In order to work the program, your computer will need to be able to read Excel. Here are some downloads for this if you do not have excel: http://www.nawert.com/Microsoft-Excel?p=US&concordancia=b&red=s&plataforma=c&anuncio=37066400030&kw=microsoft%20excel&ubicacion=&categoria=&random=9930105660467387007&posicion=1t3&gclid=CLrs5o7A6MQCFRCTfgod1UEA6Q http://download.cnet.com/3028-2077_4-75792013.html?c=SEM&s=fivemill&pid=dlcom_sem&aid=75792013_5864036817_48013625937&dlc=n&part=fivemill -
The coin ring MEGA stretcher! An idea from Skyler Jenkins, Adam McKinnney, Chris Harrison, and others. By popular demand, you can now easily make ginormous coin rings. Do you have a friend who is an offensive lineman for an NFL team? Do you want to make some amazing napkin holders? This is the tool for you. Make coin rings from dollar sized coins up to size 23. Tough enough for even brass coins and medallions. Tutorial Video: https://www.youtube.com/watch?v=CQMNmlV-PRA With this tool and the Swedish Wrap, you can now make dollar sized coins into rings from size 23 to 000! *COINS AND RINGS NOT INCLUDED* -
Out of stock
The Classic self centering coin ring punch and die set made in the U.S.A. Get that perfectly centered hole in your coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. (Be sure to check out the new Auto punch that does not require spacers) One Spacer and one Punch and die size of your choice as well as spacer -
Out of stock
The Classic self centering coin ring punch and die set made in the U.S.A. Get that perfectly centered hole in your U.S. quarter, half dollar, and Morgan coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. (Be sure to check out the new Auto punch that does not require spacers) Punch and die sizes included are: 3/8" 7/16" 1/2" -
By popular demand, now you can store your coin ring tools and organize your work space. Made from high quality red oak, this tool holder will hold your classic self centering coin ring punch, five punches, penny and dime 1/4" hole mandrel, all four stabilizing universal cones and spacer, stabilizing universal cone mandrel and the NEW starter cone. *A recent review: "Excellent tray holds my punch body, all 5 size punches/dies, all 4 folding cones, folding cone spacer, stainless steel starter cone, and the small mandrel for making dimes/pennies. Finished with what appears to be a light varnish to protect the surface while retaining the wood's natural color. The inside of each recess is bare. I might add a little clear coat or varnish in them, but I'm undecided on that as of now. If they were varnished I think the tools may clank around in each hole so maybe bare wood is the better option. I also got the Folding Die Holder which has the same finish as this. Excellent quality wood with no imperfections or cracks!" Angus MacGyver on Apr 25, 2016 5 out of 5 stars *Tools not included* -
Now punch up to a 1/4"" hole in your pennies, dimes, and other small coins! This is a custom made 1/4 inch punch, die, penny spacer, dime spacer, and a top plate with a 3/8"" hole to press and hold down the coin. The punch and die are machined from tool steel and hardened to approximately 52 rockwell. Proudly made in the U.S.A. -
BIG BOY Brass Pushers#1, #2 and #3 Choose your size. #1 is the shortest and widest, #3 is the narrowest and tallest with #2 in the middle. -
The new Big Boy swede kit with a Swede die sized for the big challenge coins and Silver Eagles (1.3 x 1.7") For additional information of the Ross pushers and tall brass in use you can view a training video here: https://www.youtube.com/watch?v=fHWGStPCL6Q The New BIG BOY kit incudes: - The largest Swede Die 1.3 x 1.7 (Silver Eagles and larger challenge coins) - All three tall brass pushers - Ross pusher. - One roll of pipe tape. - One Jason's Works sticker -
The new Big Boy Swede die sized for the big challenge coins and Silver Eagles (1.3 x 1.7") -
Get all three brass plungers. BIG BOY Brass Pushers#1, #2 and #3) -
(Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - One punch and die. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. - FREE PDF Training Manual "How To Make Coin Rings" (Swedish Wrap Technique) - FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI -
By popular demand, now you can store your coin ring tools and organize your work space. Made from high-quality red oak, this tool holder will hold your Auto coin ring punch housing and all 9 punches and dies. *Tools not included* -
By popular demand, now you can store your coin ring tools and organize your work space. Made from high quality red oak, this tool holder will hold your Auto coin ring punch, six punches, penny and dime 1/4" hole mandrel, all four stabilizing universal cones and spacer, stabilizing universal cone mandrel and the NEW starter cone. *A recent review: "Excellent tray holds my punch body, all 5 size punches/dies, all 4 folding cones, folding cone spacer, stainless steel starter cone, and the small mandrel for making dimes/pennies. Finished with what appears to be a light varnish to protect the surface while retaining the wood's natural color. The inside of each recess is bare. I might add a little clear coat or varnish in them, but I'm undecided on that as of now. If they were varnished I think the tools may clank around in each hole so maybe bare wood is the better option. I also got the Folding Die Holder which has the same finish as this. Excellent quality wood with no imperfections or cracks!" Angus MacGyver on Apr 25, 2016 5 out of 5 stars *Tools not included* -
By popular demand, now you can store your folding/reduction dies to organize your workspace. Made from high-quality red oak, this tool holder will hold up to 11 reduction dies for easy access while making your coin rings, including the 1.7 x 1.8 @17 degree BIG boy die. * A recent review: "Excellent tray holds all my folding dies! Finished with what appears to be a light varnish to protect the surface while retaining the wood's natural color. The inside of each recess is bare. I might add a little clear coat or varnish in them, but I'm undecided on that as of now. If they were varnished I think the dies may clank around in each hole so maybe bare wood is the better option. I also got the Coin Ring Tool Holder which has the same finish as this. Excellent quality wood with no imperfections or cracks!" Angus MacGyver on Apr 25, 2016 5 out of 5 stars *Tools not included* -
Sale!
DIGITAL PDF FILE - NOT A HARD COPY You will be sent an email with a link to download the PDF manual after checkout. This file is also available in the "DOWNLOADS" folder within your Jason's Works account. *When you purchase a manual, all new editions are free upon request! *Newly revised edition describing the Swedish Wrap Technique. Plus an Excel sterling calculator for free! Learn the secret of how to make rings from coins and the new method to keep the detail on the inside of the coin and many other tricks like how to get the best patina on your silver coin rings. 100% money back guarantee. This 53 page PDF manual will walk you through the process of making rings from dimes, quarters, half dollars, silver dollars, and even silver eagles! Learn how to easily get that beautiful round shape that is so hard to get. You can make these as gifts for friends and family or sell them on the side for a little extra spending money. If you want, you could even create your own business! I believe my process of making these rings is the fastest and most efficient with the highest quality of workmanship. This new process does not require hammers, wood blocks, mandrels or arbor / hydraulic presses. With a little practice, you will be able to make a ring in a matter of minutes.
The Highest Quality USA Coin Ring Tools Guaranteed
If you have any questions, feel free to reach out and email me at info@jasons.works. I look forward to making a ring for you, or even better, helping you learn how to make them yourself!
Subscribe to our newsletter
Sign Up to our newsletter to get latest updates!
Jason Stinchfield, Jason’s Works
I am proud to provide the world with the highest quality coin ring resources available. From training to tools, as well as custom made-to-order rings, I believe this is the best website on coin rings on the net. Have fun looking around, and don’t forget to subscribe to my YouTube channel to learn tips and tricks, and even watch me make a ring. Also find me at RioGrande.com, Instagram (most active ;), Facebook, and Pinterest. Be sure to browse the coin rings available as well; each ring is made by yours truly, from coin selection to dropping it in the mail.
PEOPLE I SUPPORT
Coin Ring Makers
– Adam McKinney
– Skyler Jenkins
– Joshua Janes
– Matt-MacGyver Bennett
– Robert Gibb
– Rocky Workman
– Augusta Simmons
– Gene Obrien
– Coin Ring Crafters Facebook group
– Nick Crutchfield
Tool Makers
– Rio Grande
– Skip King
– Ross coin ring tools
Copyright © 2021 Jason’s Works. All Rights Reserved | Policies, Privacy, & Terms | Site by ZOOGABOOG!