-
The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! This kit comes with one hardened stainless steel Swedish wrap die, 3 hardened bronze plungers, and one free roll of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. The idea is to use the bronze plungers to press the ring down (reeded side up and wrapped in pipe tape). These new taller style of bronze plungers are designed not to bottom out inside the die. The shortest ones is used first, then the medium sized and finally the tallest one to extrude the coin ring. For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual availabe here: https://www.etsy.com/listing/170473451/new-swedish-wrap-technique-edition-42?ref=shop_home_active_8 The smaller sized rings can be incorporated into bracelet, necklaces, pendants, earrings, even ear gauges!
-
The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings form the biggest coins! This kit comes with one 2" hardened stainless steel Swedish wrap die, 3 hardened bronze plungers, and FREE 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available.
-
The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! This kit comes with one 2" hardened stainless steel Swedish wrap die, 3 hardened bronze plungers, and FREE 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. The idea is to use the bronze plungers to press the ring down (reeded side up and wrapped in pipe tape) and use them as spacers on top of themselves to increase the stroke length as you reduce the coin further. *Now you can make the smallest rings form the biggest coins! *COINS AND RINGS NOT INCLUDED*
-
What you will receive: - .7 x.8 @17 degree reduction die - .9 x 1.0 @ 17 degree reduction die - steel folding mandrel - Coin ring anvil Watch an in-depth video of the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI (Note: Coins and pipe tape not included)
-
A set of brass plungers to replace lost or damaged (beyond repair) plungers for the dollar and half dollar Swede dies. These are the best quality available being hardened bronze, engraved witness lines and being hand lapped. These are not just mass produced but rather each one is finished by hand by a skilled craftsman or woman here is the USA. The plungers being numbered from the largest to the smallest with the largest starting with #1, #2, #3, #4, and #5. It is o.k. for the plungers to have small dings and scratches when they become well used. If need be, you can always lap the surfaces using a piece of 200 grit sand paper. NOTE: This is the full set brass plungers. For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *A special thank you to Mikael Möller, Robert Gibb (BFG Coin Rings), Bob, Russ, Troy, Mike Henry, Adam McKinney, Skyler Jenkins (Coin Rings by the Mint), Rocky Workman, Joshua Janes and countless others on Coin Ring Crafters on Facebook. You all made this possible! :) *COINS AND RINGS NOT INCLUDED*
-
The original four pack! Use these universal dies to fold and reduce coins from half dollar size to silver eagle sized coins. These are the ones you need if you have a Durston or Pepe ring stretcher reducer machine ((RSR)....Thanks Josh! ;) ). The die plate that comes with these machines can make dime and quarter sized rings by folding and reducing. If you do not have one of these models of RSR's, you will need an additional .9" x 1.0" die that I sell (or folding puck from Skip king) to fold quarters. *The coins pictured are not included*
-
Out of stockThe Classic self centering coin ring punch and die set made in the U.S.A. Get that perfectly centered hole in your coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. (Be sure to check out the new Auto punch that does not require spacers) One Spacer and one Punch and die size of your choice as well as spacer
-
This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 OR 25 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* View a youtube video using a reduction die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/
-
Buy the kit and save! This kit includes: - A Rose/Jenkins Bell Tool/Riser with a viewing window to watch your coin while using your dapping punch. - All four sizes of dapping punches. Sizes 1.5", 1.25", 1.0" and .75" - A riser (ring bearer) for full extrusion of the ring out of the bottom of the Swede dies - A wood holder to organize all your tools. - One Jason's Works sticker
-
The new Big Boy swede kit with a Swede die sized for the big challenge coins and Silver Eagles (1.3 x 1.7") For additional information of the Ross pushers and tall brass in use you can view a training video here: https://www.youtube.com/watch?v=fHWGStPCL6Q The New BIG BOY kit incudes: - The largest Swede Die 1.3 x 1.7 (Silver Eagles and larger challenge coins) - All three tall brass pushers - Ross pusher. - One roll of pipe tape. - One Jason's Works sticker
-
The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! This is the full kit and comes with two 2" hardened stainless steel Swedish wrap dies, 5 hardened bronze plungers, and a FREE tool holder, 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. Get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *COINS AND RINGS NOT INCLUDED*
-
Almost a $20 dollar savings when you purchase this complete kit for folding, stretching, and general forming tools. What you'll receive in this set: - Steel starter cone. (Used to start the fold to protect the folding cones and mandrel) - Folding cones. (Used with ring stretchers/reducers) - Universal Folding Mandrel. (Used with an arbor press or hydraulic press. I like to use mine with a 1 ton arbor press with the steel starter cone first) - Steel Universal Folding Mandrel. (For that really tough brass and larger thick coins. Wrap it in pipe tape to protect your inside detail) - 1/4" folding and stretching mandrel. (Use this tool with an arbor or hydraulic press to both fold and stretch a 1/4" hole in your coin to allow it to fit over your ring stretcher) - MEGA stretcher. A very useful tool. (This will allow you stretch a ring out to a size 23-25. Get one more to double up and make a Morgan sized ring to 1.7" outside diameter. You can make a cuff bracelet with that size!) - Coin ring anvil. (A great tool to help straighten out a wobbly ring. I use it as a spacer and top pressing plate as well. Lots of great uses with this tool) - Wood holder to organize your Jason's Works folding, stretching and forming tools.
-
Out of stockThe Classic self centering coin ring punch and die set made in the U.S.A. Get that perfectly centered hole in your U.S. quarter, half dollar, and Morgan coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. (Be sure to check out the new Auto punch that does not require spacers) Punch and die sizes included are: 3/8" 7/16" 1/2"
-
(Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - One punch and die. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. - FREE PDF Training Manual "How To Make Coin Rings" (Swedish Wrap Technique) - FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
-
Buy kits and save! (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - Two punches and dies. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. - FREE PDF Training Manual "How To Make Coin Rings" (Swedish Wrap Technique) - FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
-
By the kit and save! Designed to have the newest JW tools all in one kit. This kit includes: - The largest Swede Die with tall brass pushers and Ross pusher 1.3" x 1.7" - A Rose/Jenkins Bell Tool/Riser/Ring Bearer with a viewing window. - All four sizes of dapping punches. Sizes 1.5", 1.25", 1.0" and .75" - A Bell Tool/Riser/Ring Bearer for full extrusion of the ring out of the bottom of the Swede dies - A wood holder to organize all your tools. - One roll of pipe tape. - One Jason's Works sticker
-
This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/
-
The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! This is the full kit and comes with three hardened stainless steel Swedish wrap dies, 9 hardened bronze plungers, ring bearer, three Ross Push Followers, two rolls of pipe tape, two stickers, and a FREE tool holder. These dies are designed to be the most efficient Swedish wrap dies available. For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *COINS AND RINGS NOT INCLUDED*
-
Buy a kit and save! Also includes a PDF training manual & Excel Engine Calculator. (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - Five punches and dies. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. – FREE PDF Training Manual “How To Make Coin Rings” (Swedish Wrap Technique) – FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
-
Big savings when you buy kits! You also receive a FREE PDF Training Manual & Excel Engine Calculator with your order. (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - Six punches and dies. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. – PDF Training Manual “How To Make Coin Rings” (Swedish Wrap Technique) – Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
-
Save when you purchase a kit! This starter kit is for the person who is interested in learning the coin ring craft and wants a jump start on tools and techniques. (NOTE: The punch in this kit does not require spacers to center coins) This kit is designed to make rings for the most common sized coin rings for men and women. Please view this video for proper use of the punch: https://www.youtube.com/watch?v=GIkQy1H6MiI
-
Also includes a FREE PDF Training Manual & Excel Engine Calculator. What you will receive: - Top and bottom Auto Punch housing. - Nine punches and dies. 1/4', 5/16", 3/8", 7/16", 9/16", 1/2", 5/8", 11/16" and 3/4" - Wood tool holder for the housing and all nine punches - One protective plastic washer to protect the top housing during transport. Watch an in-depth video of the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI (Note: The Auto punches will not work in the classic self centering punch)
-
The biggest savings when you purchase this kit! This kit is designed for the person who wants every Jason's Works tool, the best of the best! Even before I started offering tools (I was directing people in my manual to my machinist to make them tools at the time), my machinist told me he kept getting requests for "the whole gamut" of tools. Well, that is finally available! This kit includes: - 9 piece Auto punch kit (does not require spacers) - 11 piece reduction die kit - Folding and stretching kit - Master Swede kit - Coin ring manual (A PDF file will be emailed to you upon processing your order. Commonly known as "The coin ring Bible". You can print this off if you would like a hard copy. New and free PDF editions will be sent to you upon request.) - Three rolls of pipe tape - Three Jason's Works Stickers - Jason's Works business card Always wear safety glasses when using this punch/die set and a brass hammer. Please view this video for proper use of the punch: https://www.youtube.com/watch?v=GIkQy1H6MiI&t=149s *COINS AND RINGS NOT INCLUDED*