• Coin Ring Tools USA Complete Set - Master Deluxe Kit - Jason's Works
    Almost a $1,800 value if each tool is purchased separately! This kit is designed for the person who wants every Jason's Works tool, the best of the best! Even before I started offering tools (I was directing people in my manual to my machinist to make them tools at the time), my machinist told me he kept getting requests for "the whole gamut" of tools. Well, that is finally available! This kit includes: - 9 piece Auto punch kit (does not require spacers) - 11 piece reduction die kit - Folding and stretching kit - Master Swede kit - Coin ring manual (A PDF file will be emailed to you upon processing your order. Commonly known as "The coin ring Bible". You can print this off if you would like a hard copy. New and free PDF editions will be sent to you upon request.) - Three rolls of pipe tape - Three Jason's Works Stickers - Jason's Works business card Always wear safety glasses when using this punch/die set and a brass hammer. Please view this video for proper use of the punch: https://www.youtube.com/watch?v=GIkQy1H6MiI&t=149s *COINS AND RINGS NOT INCLUDED*
  • Coin Ring Tool - Punch/Die Combo - Jason's Works
    Also includes a FREE PDF Training Manual & Excel Engine Calculator. What you will receive: - Top and bottom Auto Punch housing. - Nine punches and dies. 1/4', 5/16", 3/8", 7/16", 9/16", 1/2", 5/8", 11/16" and 3/4" - Wood tool holder for the housing and all nine punches - One protective plastic washer to protect the top housing during transport. Watch an in-depth video of the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI   (Note: The Auto punches will not work in the classic self centering punch)
  • reduction_dies_original_jasons_works_ring_6 auto_punch_coin_ring_starter_kit_original_jasons_works
    A $621 value! This starter kit is for the person who is interested in learning the coin ring craft and wants a jump start on tools and techniques. (NOTE: The punch in this kit does not require spacers to center coins) This kit is designed to make rings for the most common sized coin rings for men and women. Please view this video for proper use of the punch: https://www.youtube.com/watch?v=GIkQy1H6MiI
  • auto_punch_coin_ring_tools_jasons_works_12 Auto-Punch-(6)-PunchDie-Combo_Jasons_Works
    Over $80 savings! That’s a free punch and die! You also receive a FREE PDF Training Manual & Excel Engine Calculator with your order. (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - Six punches and dies. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. – PDF Training Manual “How To Make Coin Rings” (Swedish Wrap Technique) – Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
  • Coin-Ring-Tools-Master-Swede-Kit-Jasons-Works Coin-Ring-Tools-Master-Swede-Kit-Jasons-Works
    The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! This is the full kit and comes with three hardened stainless steel Swedish wrap dies, 9 hardened bronze plungers, ring bearer, three Ross Push Followers, two rolls of pipe tape, two stickers, and a FREE tool holder. These dies are designed to be the most efficient Swedish wrap dies available. For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *COINS AND RINGS NOT INCLUDED*
  • Coin Ring Auto Punch + (5) Punch / Die Combos - Jason's Works Coin Ring Auto Punch + (5) Punch / Die Combos - Jason's Works
    More than $80 savings! That's a free punch and die! Also includes a PDF training manual & Excel Engine Calculator. (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - Five punches and dies. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. – FREE PDF Training Manual “How To Make Coin Rings” (Swedish Wrap Technique) – FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
  • FULL-SET-of-17-and-25-degree-Universal-dies-.7″-through-1.8″-17-degrees-and-.7-through-1.6-@-25-degrees FULL-SET-of-17-and-25-degree-Universal-dies-.7″-through-1.8″-17-degrees-and-.7-through-1.6-@-25-degrees
    This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/
  • Auto Punch + (2) Punch / Die Combos - Coin Ring Tools - Jason's Works
    A $40 savings! (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - Two punches and dies. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. - FREE PDF Training Manual "How To Make Coin Rings" (Swedish Wrap Technique) - FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI  
  • Auto Punch - Coin Ring Tools & Custom Made Coin Rings - Jason's Works Auto Punch - Coin Ring Tools & Custom Made Coin Rings - Jason's Works
    A $30 Savings! (Note: The Auto punches will not work in the classic self centering punch) What you will receive: - Top and bottom Auto Punch housing. - One punch and die. Size of your choice. Select available sizes. - One protective plastic washer to protect the top housing during transport. - FREE PDF Training Manual "How To Make Coin Rings" (Swedish Wrap Technique) - FREE Excel Engine Calculator For Alloying Your Coin Silver Scrap Into Sterling Silver Watch an in depth video about the punch here: https://www.youtube.com/watch?v=GIkQy1H6MiI
  • Out of stock
    Coin Ring Punch Kit & Die Set - Coin Ring Tools - Jason's Works
    The Classic self centering coin ring punch and die set made in the U.S.A. Get that perfectly centered hole in your U.S. quarter, half dollar, and Morgan coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. (Be sure to check out the new Auto punch that does not require spacers) Punch and die sizes included are: 3/8" 7/16" 1/2"  
  • USA Coin Ring Tools - Folding & Stretching Kit - Jason's Works
    Almost a $20 dollar savings when you purchase this complete kit for folding, stretching, and general forming tools. What you'll receive in this set: - Steel starter cone. (Used to start the fold to protect the folding cones and mandrel) - Folding cones. (Used with ring stretchers/reducers) - Universal Folding Mandrel. (Used with an arbor press or hydraulic press. I like to use mine with a 1 ton arbor press with the steel starter cone first) - Steel Universal Folding Mandrel. (For that really tough brass or even steel coins. Wrap it in pipe tape to protect your inside detail) - 1/4" folding and stretching mandrel. (Use this tool with an arbor or hydraulic press to both fold and stretch a 1/4" hole in your coin to allow it to fit over your ring stretcher) - MEGA stretcher. A very useful tool. (This will allow you stretch a ring out to a size 23-25. Get one more to double up and make a Morgan sized ring to 1.7" outside diameter. You can make a cuff bracelet with that size!) - Coin ring anvil. (A great tool to help straighten out a wobbly ring. I use it as a spacer and top pressing plate as well. Lots of great uses with this tool) - Wood holder to organize your Jason's Works folding, stretching and forming tools.
  • Out of stock
    Coin Ring Punch Kit (Self Centering) - Coin Ring Tools - Jason's Works Coin Ring Punch Kit (Self Centering) - Coin Ring Tools - Jason's Works
    The Classic self centering coin ring punch and die set made in the U.S.A. Get that perfectly centered hole in your coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. (Be sure to check out the new Auto punch that does not require spacers) One Spacer and one Punch and die size of your choice as well as spacer  
  • Coin Ring Swedish Wrap Kit Dollar & 1/2 Sized Dollar - Jason's Works
    The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! This is the full kit and comes with two 2" hardened stainless steel Swedish wrap dies, 5 hardened bronze plungers, and a FREE tool holder, 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. Get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *COINS AND RINGS NOT INCLUDED*
  • coin ring reduction dies original Jasons's Works
    This is a full set of the universal double sided folding and reducing dies ranging from .7" to 1.6" openings at 17 OR 25 degrees for optimal folding and reducing. These dies can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. dime to Silver Eagle sized coins leaving no mark on the inside of the coin. This die can also be used to fold and reduce similar sized coins for final sizing of coin rings. These dies can be used in conjunction with each other to pretty much fold and reduce all coins :) *The coins pictured are not included* View a youtube video using a reduction die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/
  • Reduction Folding Dies (4 Pack) - Coin Ring Tools - Jason's Works Coin Ring Reduction Die (4 Pack) - Coin Ring Tools - Jason's Works
    The original four pack! Use these universal dies to fold and reduce coins from half dollar size to silver eagle sized coins. These are the ones you need if you have a Durston or Pepe ring stretcher reducer machine ((RSR)....Thanks Josh! ;) ). The die plate that comes with these machines can make dime and quarter sized rings by folding and reducing. If you do not have one of these models of RSR's, you will need an additional .9" x 1.0" die that I sell (or folding puck from Skip king) to fold quarters.   *The coins pictured are not included*
  • swedish_wrap_tall_brass_plungers_jasons_works_2 swedish_wrap_tall_brass_plungers_jasons_works_2
    A set of brass plungers to replace lost or damaged (beyond repair) plungers for the dollar and half dollar Swede dies. These are the best quality available being hardened bronze, engraved witness lines and being hand lapped. These are not just mass produced but rather each one is finished by hand by a skilled craftsman or woman here is the USA. The plungers being numbered from the largest to the smallest with the largest starting with #1, #2, #3, #4, and #5. It is o.k. for the plungers to have small dings and scratches when they become well used. If need be, you can always lap the surfaces using a piece of 200 grit sand paper. NOTE: This is the full set brass plungers.   For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual available here: https://jasons.works/product/coin-ring-tools-training-manual/ *A special thank you to Mikael Möller, Robert Gibb (BFG Coin Rings), Bob, Russ, Troy, Mike Henry, Adam McKinney, Skyler Jenkins (Coin Rings by the Mint), Rocky Workman, Joshua Janes and countless others on Coin Ring Crafters on Facebook. You all made this possible! :) *COINS AND RINGS NOT INCLUDED*
  • swedish_wrap_kit_8x11_coin_ring_tools_jasons_works swedish_wrap_kit_8x11_coin_ring_tools_jasons_works
    The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! This kit comes with one 2" hardened stainless steel Swedish wrap die, 3 hardened bronze plungers, and FREE 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. The idea is to use the bronze plungers to press the ring down (reeded side up and wrapped in pipe tape) and use them as spacers on top of themselves to increase the stroke length as you reduce the coin further. *Now you can make the smallest rings form the biggest coins!     *COINS AND RINGS NOT INCLUDED*
  • Coin Ring Swedish Wrap Kit for Dollar Sized Coins - Jason's Works Coin Ring Swedish Wrap Kit for Dollar Sized Coins - Jason's Works
    The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings form the biggest coins! This kit comes with one 2" hardened stainless steel Swedish wrap die, 3 hardened bronze plungers, and FREE 2 rolls of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available.
  • Coin Ring Swedish Wrap Kit Quarter & Dime Sized Coins - Jason's Works Coin Ring Swedish Wrap Kit Quarter & Dime Sized Coins - Jason's Works
    The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! This kit comes with one hardened stainless steel Swedish wrap die, 3 hardened bronze plungers, and one free roll of pipe tape, and a Jason's Works Sticker. These dies are designed to be the most efficient Swedish wrap dies available. The idea is to use the bronze plungers to press the ring down (reeded side up and wrapped in pipe tape). These new taller style of bronze plungers are designed not to bottom out inside the die. The shortest ones is used first, then the medium sized and finally the tallest one to extrude the coin ring.   For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g And also get detailed step by step instructions from my training manual availabe here: https://www.etsy.com/listing/170473451/new-swedish-wrap-technique-edition-42?ref=shop_home_active_8 The smaller sized rings can be incorporated into bracelet, necklaces, pendants, earrings, even ear gauges!  
  • Coin Ring Swedish Die - Coin Ring Tools - Jason's Works swede_die_ross_pusher_coin_ring_tools_jasons_work
    The Ross Push Follower designed for Jason's Works Swedish Dies. Choose the size you need for your Swedish Die, The Small is for the .6 x .9 Quarter Swede die, Medium is for the .8 x 1.1 half dollar Swede die, and the Large is for the 1.0 x 1.4 Dollar Swede Die. Stay tuned for an in depth video showing these at work.
  • Full_Set_of_Ross_Push_Followers_for_Original_Jasons_Works_Swede_Dies
    The Ross Push Follower designed for Jason's Works Swedish Dies. Choose the size you need for your Swedish Die, The Small is for the .6 x .9 Quarter Swede die, Medium is for the .8 x 1.1 half dollar Swede die, and the Large is for the 1.0 x 1.4 Dollar Swede Die Stay tuned for an in depth video showing these at work.
  • Out of stock
    Classic Coin Ring Tool Punch Upgrade Kit Classic Punch - Original Jason's Works
    Now punch up to a 3/8" hole in your pennies, dimes, and other small coins! This is a custom made 1/4 inch punch, die, penny spacer, dime spacer, and a top plate with a 3/8"" hole to press and hold down the coin. The punch and die are machined from tool steel and hardened to approximately 52 rockwell. Proudly made in the U.S.A.
  • swede_die_coin_ring_tools_jasons_works_2 swede_die_coin_ring_tools_jasons_works_2
    The coin ring technique called the Swedish Wrap, (created by Mikael Möller from Sweden) is now available! *Now you can make the smallest rings from the biggest coins! These dies are designed to be the most efficient Swedish wrap dies available. Choose the size you would like to get. Multiple dies can be ordered by placing separate with orders in your cart.   For additional information you can view a training video here: https://www.youtube.com/watch?v=W7gZxUKNr1g https://www.youtube.com/watch?v=fHWGStPCL6Q And also get detailed step by step instructions from my training manual availabe here: https://www.youtube.com/watch?v=fHWGStPCL6Q The smaller sized rings can be incorporated into bracelets, necklaces, pendants, earrings, even ear gauges!   *COINS AND RINGS NOT INCLUDED*
  • short_brass_plunger_swedish_wrap_jasons_work_0 Coin Ring Brass Plungers (Swedish Die Replacement) - Jason's Works
    A set of brass plungers to replace lost or damaged (beyond repair) plungers for the dollar and half dollar Swede dies. These are the best quality available being hardened bronze, engraved witness lines and being hand lapped. These are not just mass produced but rather each one is finished by hand by a skilled craftsman or woman here is the USA. The plungers being numbered from the largest to the smallest with the largest starting with #1, #2, #3, #4, and #5. It is o.k. for the plungers to have small dings and scratches when they become well used. If need be, you can always lap the surfaces using a piece of 200 grit sand paper. NOTE: This is the full set brass plungers. *A special thank you to Mikael Möller, Robert Gibb (BFG Coin RIngs), Bob, Russ, Troy, Mike Henry, Adam McKinney, Skyler Jenkins (Coin Rings by the Mint), Rocky Workman, Joshua Janes and countless others on Coin Ring Crafters on Facebook. You all made this possible! :) *COINS AND RINGS NOT INCLUDED*
  • This is a complete folding cones set: Hardened Stainless steel starter cone, spacer and 4 different sized folding cones! Protect your stabilizer folding cones, mandrels, and be able to fold the harder alloyed coins such as nickels and brass medallions without damaging your folding tools or removing deetail from the inside of your coin if using a steel cone. No need to wast time wrapping in pipe tae either. Use the steel starter cone for your first press to start the folding process. The first press has the most impact on your folding tools. This specialized cone will take the brunt of that first press without damaging the detail of the coin. Be sure not to press too far (until you feel resistance) as you only want to begin the folding process with this cone and then finish with the specialized stabilizer folding cone or mandrels to protect the detail of the coin. (The stabilizer cones and mandrels are recommended for folding as it does not harm the detail as as teel folding tool would. Don't forget to bevel the holes edge and anneal often when folding to keep from splitting your ring! PRO TIP: Lubricate the folding cones with Burr life (RioGrande.com) or Ivory soap to keep the rings from sticking t the cones when folding. *GUARANTEED YOU'LL LIKE THIS TOOL OR YOUR MONEY BACK!* *BE SURE TO SOFTEN THE EDGES OF THE HOLE IN THE COIN FOR BEST RESULTS* *CHECK OUT THE VIDEO ON THIS TOOL HERE. COPY AND PASTE IN YOUR URL ADDRESS BOX https://www.youtube.com/watch?v=rxrwhDnAfWY  
  • BIG BOY Folding Reduction Die - Coin Ring Tools - Jason's Works BIG BOY Folding Reduction Die - Coin Ring Tools - Jason's Works
    New! "BIG BOY" Folding/Reduction Die! This is a double sided reduction die as described in my manual with 1.700" and 1.800" openings. This die can be used to start folding and reducing larger privately minted silver, brass, and copper rounds while using the stabilizer folding cones and mandrels to begin folding these rounds leaving no mark on the inside of the coin. Named "BIG BOY" die for Rocky Workman who made this die possible. Thanks to everyone on Coin Ring Crafters on facebook that helped this die come to fruition. NOTE: This die will fit under the new Durston ring stretcher/reducer but will not fit under the older model unless the center pin is removed that spins the multiple holed die plate that comes with the stretcher. NOTE: This die will work in conjunction with arbor and hydraulic presses. Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY Be sure to follow me on youtube and etsy for new tools coming out. NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://jasons.works/product/coin-ring-tools-training-manual/
  • Coin Ring Mega Stretcher - Coin Ring Tools - Jason's Works Coin Ring Mega Stretcher - Coin Ring Tools - Jason's Works
    The coin ring MEGA stretcher! An idea from Skyler Jenkins, Adam McKinnney, Chris Harrison, and others. By popular demand, you can now easily make ginormous coin rings. Do you have a friend who is an offensive lineman for an NFL team? Do you want to make some amazing napkin holders? This is the tool for you. Make coin rings from dollar sized coins up to size 23. Tough enough for even brass coins and medallions. Tutorial Video: https://www.youtube.com/watch?v=CQMNmlV-PRA With this tool and the Swedish Wrap, you can now make dollar sized coins into rings from size 23 to 000! *COINS AND RINGS NOT INCLUDED*
  • swedish_wrap_ring_bearer_jasons_works_3
    New! "Ring Bearer". This is a die used in conjunction with Swedish Wrap dies to allow space for the ring to be extruded. Simply place your Swedish die into the groove of the "Ring Bearer". The 'Ring Bearer" aligns the Swedish die so there is no chance of the ring coming in contact and possibly damaging the ring. There is a cut away portion of the die so you can see the extrusion process. The "Ring Bearer" will also fit with standard dies and can be used to support and lift the standard dies when using folding tools. (will not fit the "Big Boy"Die). NOTE: This die will work in conjunction with arbor and hydraulic presses.
  • Coin Ring Punch Die - Coin Ring Tools - Jason's Works
    Choose the size punch and die you want for your classic self centering Jason's Works punch housing. Ideal to grow your punch kit or replace a worn or damaged punch. The punch and dies are made from hardened tool steel for long lasting punching. You can resharpen your punches for ultimate performance. Available sizes are: - 1/4" (bushing die) - 3/8" (bushing die) - 7/16" (bushing die) - 1/2" (bushing die) - 5/8" (washer plate die) - 3/4" (washer plate die) *NOTE: The punch housing and spacers are not included. *Here is a video showing how to use the coin punch: https://www.youtube.com/watch?v=D4Fcjl6uWAIj NOTE: Here is a video showing how to use the washerplate type dies for the 5/8" ad 3/4" punches and the mega stretcher: https://www.youtube.com/watch?v=CQMNmlV-PRA NOTE: You can use either side of the washer platedie in the punch housing.
  • Coin Ring Tool - Punch/Die Combo - Jason's Works Coin Ring Tool - Punch/Die Combo - Jason's Works
    (NOTE: The Auto punches will not work in the classic self centering punch) (NOTE: Punch housing not included) Choose the punch size you would like. For multiple punches, please add multiple orders to your cart. The hole size has a direct effect on the band width of the finished ring. The bigger the hole, the smaller the band width for a specific coin. I believe the largest possible ring sizes for coins look best with a wider bands as the material stretches thinner and the smallest possible ring sizes for coins look best with larger holes as the material compresses and elongates.
  • Fat Tire Look Reduction Die - Coin Ring Tools - Jason's Works
    This is a double sided reduction die as described in my manual with .9" and 1.0" openings at 25 degrees for the optimal fat tire look. The faces are at a special 25 degree, allowing for the detail on the outside of the coin ring to be better protected while reducing during the final sizing. This die is specifically used to get the smallest sizes possible on the smaller coins during the final stage of sizing. This die is to be used in conjunction with the other dies available and not by itself alone. You can achieve more of the "fat tire" look by using this die last. Coin sizes that can be used are the quarter, nickle and penny. * NOTE * This die should be used after the initial reducing has been done from the other dies in the set, and not by itself alone. This die will help your coin ring to achieve more of the rounded edge look (Fat Tire).
  • Universal "Fat Tire Look" Reduction Die - Coin Ring Tools - Jason's Works
    This is a double sided reduction die as described in my manual with .7" and .8" openings at 25 degrees for the optimal fat tire look. The faces are at a special 25 degree, allowing for the detail on the outside of the coin ring to be better protected while reducing during the final sizing. This die is specifically used to get the smallest sizes possible on the smaller coins during the final stage of sizing. This die is to be used in conjunction with the other dies available and not by itself alone. You can achieve more of the "fat tire" look by using this die last. Coin sizes that can be used are the quarter, nickle and penny. * NOTE * This die should be used after the initial reducing has been done from the other dies in the set, and not by itself alone. This die will help your coin ring to achieve more of the rounded edge look (Fat Tire). *The coins pictured are not included* Tutorial Video: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • Coin Ring Folding Die - Coin Ring Making Tools - Jason's Works Coin Ring Folding Die - Coin Ring Making Tools - Jason's Works
    Improved! New Hardened Stainless Steel! This is a double sided reduction die as described in my manual with a 1.300" and 1.400" openings at 17 degrees. This die can be used to reduce United States dollar sized coins. This die can also be used in conjunction with the stabilizer folding cones/mandrels to fold half dollars and dollars sized coins leaving no mark on the inside of the coin. *NOTE: You will need the larger die to begin the folding process with the stabilizer folding cones/mandrels for Morgan dollar sized coins. This die is used to start the folding process on half dollar sized coins. These are the reduction dies as described in my manual. Three dies in total can be used to fold and reduce half dollar, dollar, and silver eagle sized coins. Tutorial Video: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • One Universal Folding/Reduction Die Hardened Stainless Steel .7" through 1.6" @ 17 degrees
    This is a double sided folding and reducing die with .7" and .8" openings at 17 degrees for optimal folding and reducing. This die can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. penny and dime sized coins leaving no mark on the inside of the coin. This die can also be used to reduce similar sized coins for final sizing of coin rings. *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • One Universal Folding/Reduction Die Hardened Stainless Steel .9" x 1.0" @ 17 degrees One Universal Folding/Reduction Die Hardened Stainless Steel .9" x 1.0" @ 17 degrees
    This is a double sided folding and reducing die with .9" and 1.0" openings at 17 degrees for optimal folding and reducing. This die can be used in conjunction with the stabilizer folding cones and mandrels to fold U.S. quarter and nickel sized coins leaving no mark on the inside of the coin. This die can also be used to reduce similar sized coins for final sizing of coin rings. *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • Universal "Fat Tire Look" Reduction Die - Coin Ring Tools - Jason's Works Universal "Fat Tire Look" Reduction Die - Coin Ring Tools - Jason's Works
    This is a double sided reduction die as described in my manual with 1.100" and 1.200" openings. The faces are at a special 25 degree, allowing for the detail on the outside of the coin ring to be better protected while reducing during the final sizing. This die is specifically used to get the smallest sizes possible on the larger coins during the final stage of sizing. This die is to be used in conjunction with the other dies available and not by itself alone. You can achieve more of the "fat tire" look. Coin sizes that can be used are the half dollar, dollar and Silver Eagle. * NOTE * This die should be used after the initial reducing has been done from the other dies in the set, and not by itself alone. This die will help your coin ring to achieve more of the rounded edge look (Fat Tire). *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • Hardened steel coin ring reduction die Jasons Works
    This is a double sided reduction die as described in my manual with 1.1" and 1.2" openings. This die is be used in conjunction with the stabilizer folding cones and mandrels to finish the folding process of half dollars and dollars leaving no mark on the inside of the coin. This die can also be used to reduce United States half dollar coins and finish sizing dollar coins to smaller sizes. *NOTE: You will need the larger dies to begin the folding process with the stabilizer cones and mandrels for U.S. half dollar and dollar sized coins. *The coins pictured are not included*
  • One Reduction/Folding Die Hardened Stainless Steel for U.S. Silver Eagle sized coins 1.5" x 1.6" at 17 degrees
    New Hardened Stainless Steel! This is a double sided reduction die as described in my manual with 1.500" and 1.625" openings. This die can be used to start reducing and folding United States Silver Eagle sized coins. This die can also be used in conjunction with the stabilizer folding cones and mandrels to begin folding dollars and silver eagles leaving no mark on the inside of the coin. *The coin pictured is not included* Tutorial Video: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • Coin Ring Folding Die - Coin Ring Making Tools - Jason's Works Coin Ring Folding Die - Coin Ring Making Tools - Jason's Works
    NEW! Large 25 degree die for getting that "fat tire" look on your larger coin rings. By popular demand, this is a double sided reduction die with 1.3" and 1.4" openings. The faces are at a special 25 degree, allowing for the detail on the outside of the coin ring to be better protected while reducing during the final sizing. This die is specifically used to achieve a fat tire look on the larger sized rings. (Remember, that fat tire look is achieved by over sizing your target size by several sizes and then reducing the ring down to your target size). This die is to be used in conjunction with the other dies available and not by itself alone. Coins that can be used are the half dollar, dollar and Silver Eagle. * NOTE * This die should be used after the initial reducing has been done from the other dies in the set, and not by itself alone. This die will help your large coin rings to achieve more of the rounded edge look (Fat Tire). *The coins pictured are not included* Copy and paste this address into your internet browser address bar to see a youtube video using a die: https://www.youtube.com/watch?v=lCwPbu1lGLY NOTE: A detailed description of the coin ring making process can be found in "How to Make Coin Rings" training manual found here: https://www.etsy.com/listing/170473451/training-manual-on-how-to-make-double?
  • ross_push_followers_jasons_works_coin_ring_tools_2 ross_push_followers_jasons_works_coin_ring_tools_4
    The Ross Push Follower designed for Jason's Works Swedish Dies. Choose the size you need for your Swedish Die, The Small is for the .6 x .9 Quarter Swede die, Medium is for the .8 x 1.1 half dollar Swede die, and the Large is for the 1.0 x 1.4 Dollar Swede Die Stay tuned for an in depth video showing these at work.
  • fix-wobbly-coin-rings-anvil-folding-tools
    Made from hardened stainless steel, this anvil is used to help straighten wobbly coin rings and is made to be used with a ring sizing machine or other presses. If your coin ring begins to get a wobble or deformation, especially found in Ben Franklin halves and silver Washington quarters, use this anvil and a press to help straighten it out. This can be used with the ring sizer or an arbor/hydraulic press. You can apply the UHMW adhesive tape to your ram and this anvil to help protect the reeded edge of the coin ring.
    "These are handy, I have two, because Im always losing one or the other of them. If you use this in conjunction with the ball bearings, you can straighten just about all of your wobbly rings. and most of the time A little sand paper is needed as well." - James (Etsy, Jan 8, 2018)
  • Folding Tools Stabilizer Mandrel Cone Coin Ring Making Jason's Works Folding Tools Stabilizer Mandrel Cone Coin Ring Making Jason's Works
    NEW TOOL! Designed for hard metal coins like brass and nickel. Wrap with teflon tape to keep the detail of the coin. Also stops coins from slipping in reduction dies when folding. * Receive a FREE roll of teflon with your purchase* *GUARANTEED YOU'LL LIKE THIS TOOL OR YOUR MONEY BACK!* *BE SURE TO SOFTEN THE EDGES OF THE HOLE* *CHECK OUT THE VIDEO ON THESE TOOLS HERE (copy and paste into your url address bar: https://www.youtube.com/watch?v=UhO3sae6TwU *Recent reviews and testimonial from customers: Jason, Once again, thank you very much and thanks for what you are doing for the craft of coin ring making. Your passions and expertise have elevated it to a level of technical professionalism which wasn't accessible to beginners before your involvement. Coin ring making is a craft which satisfies creative urges but it can also provide financial rewards - no small thing in today's economy! Instead of banging away on a mandrel, a time consuming and inaccurate procedure, a novice can quickly and easily make professional quality rings, using your tools and instructions. You've made ring quality accessible by cutting down on the learning curve. I'm looking forward to hearing about the new techniques! Gene LordOfTheCoinRings 2 days ago Jason, I owe my success as a ring maker to you and your videos on youtube. You are my Yoda - and I would really like to send you a ring. Could you pass me along your PO box when you get a chance. I just want to say thank you. I've specialized in 999 fine silver/gold, so that is all I do now and I'd really like to send you one. I figure, if its a bit too small or large, well you can certainly fix it. But shoot me your size too. Thanks! Lauro Chavez "ACCEPT NO SUBSTITUTES!!!!! Im not receiving anything in exchange for this review, but you gotta know that these tools are the best out there. If you take this craft seriously, and want to provide the best possible results to your rings, you have to go with jasonsworks tools. Period. Even beginners need to know that if you just get jasonsworks tools to begin with, you will save yourself tons of headaches and hassles." Capital Coin Rings on Apr 24, 2016 5 out of 5 stars This is the stabilizer folding mandrel designed to replace the Delrin Folding Balls. Designed for the coin ring makers that like to use a hydraulic press or arbor press when folding their coins. This is the same as the folding cones but taller for the longer stroke presses. Use this to begin and finish coin sizes from quarters to silver eagles with holes ranging from 3/8 inch to 5/8 inch. Be sure to protect your mandrel! Always remove the sharp edge of the hole in your coin just as you would for the delrin balls and stabilizer cones. The mandrel will fold a coin with a 3/8 inch hole and up to a 5/8 inch hole. Common coin sizes would be a quarter up to an American Silver Eagle. The process is to stack at least two reduction dies stacked up on top of on another and place a coin into a suitable sized universal reduction die. (You stack two dies in order to get enough stroke length for the mandrel when it passes through the dies.) Next, Insert the mandrel into the hole of the coin and under the ram of a suitable press. Begin pressing the mandrel into the coin to start the folding process. As the coin is folded, the overall diameter begins to shrink and you will need to place the coin into a smaller reduction die to continue folding. Be sure to anneal the coin as needed during the folding process. The mandrel is made from jardened stainless steel. *For a full and detailed description on how to use the stabilizing folding mandrel, please refer to my manual that can be purchased here: https://jasons.works/product/coin-ring-tools-training-manual/ *Here is a testimonial from a gentleman who tried out the stabilizer folding cones* "Hello Jason, I got the new delrin replacement tool yesterday and I spent several hours today using it - What a great idea! I am sure that this is going to become the new standard for making coin rings. I don't know if you can patent it, but when this comes out I think you will be copied by all others who make tools. No more slipping with the cone shape (but you still have to go slow to make sure the coin stays even). It also gives a more uniform shape as you work the press. I don't know what it's made out of but it seems to be super strong. Thanks for letting me try it out and for the extra set of delrin balls. I will keep using it and let you know how it's holding up. When you introduce it I will give you a thumbs up review! Thanks so much!....Gene." *NOTE: DO NOT OVER PRESS THE MANDREL INTO THE COIN WHEN USING A HYDRAULIC PRESS. AS SOON AS THE COIN IS IN FULL CONTACT WITH THE MANDREL, YOU SHOULD STOP THE FOLDING PROCESS. *Coins not included*
  • Folding Tools Stabilizer Mandrel Cone Coin Ring Making Jason's Works
    NEW STABILIZING TOOLS! Replaces the delrin balls and stops coins from slipping in reduction dies when folding when using a ring stretcher reducer! Made from the hardest machinable plastic in existence. You'll see competitors that sell a softer translucence plastic folding cone of the same design that do not hold up nearly as well. *GUARANTEED YOU'LL LIKE THESE TOOLS OR YOUR MONEY BACK!* *BE SURE TO SOFTEN THE EDGES OF THE HOLE TO REDUCE WEAR ON THE CONES*
  • Mandrel for 1/4" holes in penny and dime sized coins - Jason's Works Mandrel for 1/4" holes in penny and dime sized coins - Jason's Works
    Use this mandrel to expand the 1/4" hole in pennies, dimes, or any other coin that you punch a 1/4" hole in. This tool folds the coin and expands the hole so that the coin will fit onto the expanding mandrel of the coin ring stretcher/reducer.
  • Universal Stabilizer Folding Mandrel Hydraulic/Arbor Press - Jason's Works Universal Stabilizer Folding Mandrel Hydraulic/Arbor Press - Jason's Works
    This is the stabilizer folding mandrel designed to replace the Delrin Folding Balls. Designed for the coin ring makers that like to use a hydraulic press or arbor press when folding their coins. This is the same as the folding cones but taller for the longer stroke presses. Use this to begin and finish coin sizes from quarters to silver eagles with holes ranging from 3/8 inch to 5/8 inch. Be sure to protect your mandrel! Always remove the sharp edge of the hole in your coin just as you would for the delrin balls and stabilizer cones. The mandrel will fold a coin with a 3/8 inch hole and up to a 5/8 inch hole. Common coin sizes would be a quarter up to an American Silver Eagle.
  • USA Coin Ring Tools - Folding & Stretching Tool Holder - Jason's Works
    By popular demand, now you can store your Jason's Works folding and stretching tools to organize your workspace. Made from high-quality red oak, this tool holder will hold up to 11 reduction dies for easy access while making your coin rings, including the 1.7 x 1.8 @17 degree BIG boy die. *Tools not included*
  • FULL-SET-of-17-and-25-degree-Universal-dies-.7-through-1.8-17-degrees-and-.7-through-1.6-25-degrees_4 FULL-SET-of-17-and-25-degree-Universal-dies-.7″-through-1.8″-17-degrees-and-.7-through-1.6-@-25-degrees
    By popular demand, now you can store your folding/reduction dies to organize your workspace. Made from high-quality red oak, this tool holder will hold up to 11 reduction dies for easy access while making your coin rings, including the 1.7 x 1.8 @17 degree BIG boy die. * A recent review: "Excellent tray holds all my folding dies! Finished with what appears to be a light varnish to protect the surface while retaining the wood's natural color. The inside of each recess is bare. I might add a little clear coat or varnish in them, but I'm undecided on that as of now. If they were varnished I think the dies may clank around in each hole so maybe bare wood is the better option. I also got the Coin Ring Tool Holder which has the same finish as this. Excellent quality wood with no imperfections or cracks!" Angus MacGyver on Apr 25, 2016 5 out of 5 stars *Tools not included*
  • Auto-Punch-with-all-9-PunchDie-Combo-FULL-SET
    By popular demand, now you can store your coin ring tools and organize your work space. Made from high-quality red oak, this tool holder will hold your Auto coin ring punch housing and all 9 punches and dies. *Tools not included*
  • Coin-Ring-Tools-Master-Swede-Kit-Jasons-Works
    Store your Swedish Wrap tools in a custom made holder. Made from high quality red oak, this tool holder will hold your two Swedish dies and 5 bronze plungers. *Tools not included*
  • Coin Ring Swedish Wrap Kit Dollar & 1/2 Sized Dollar - Jason's Works swedish_wrap_kit_dollar_half_dollar_jasons_works_4
    Store your Swedish Wrap tools in a custom made holder. Made from high quality red oak, this tool holder will hold your two Swedish dies and 5 bronze plungers. *Tools not included*